DIN Standards Committee Materials Testing
Non-destructive testing - Thermographic testing - Active thermography with inductive excitation
Abstract
This document specifies a method and establishes guidelines for non-destructive testing using active thermography with inductive excitation. By using inductive heating of the test object, this active thermography method is suited to inspect test objects made of metals or other electrically conductive materials. Such tests are conducted for: — the detection of surface-breaking discontinuities, particularly cracks; and — the detection of discontinuities located near the surface. The functional principle of the defect detection can be based on a direct interaction of defect and excitation signal (defect selective) or an indirect interaction by using derivations of the applied heat flow. For this purpose, active thermography with inductive excitation is conducted using different sources of excitation (inductors) in reflection and transmission configurations. Areas tested in one shot are typically between few cm2 and a few hundred cm2, depending on the geometry of the used inductor. In dynamic configuration, larger areas can be tested. Fields of application for active thermography with inductive excitation are to be found in industrial manufacturing and in maintenance (vehicle, drive system and power plant components, jointing technique, semi-finished products etc.). Active thermography with inductive excitation is also called inductive thermography or eddy-current excited thermography.
Begin
2025-05-27
WI
00138321
Planned document number
DIN EN 00138321
Project number
06236955
Responsible national committee
NA 062-11-16 AA - Thermographic testing
Responsible european committee
CEN/TC 138/WG 11 - Thermographic testing
previous edition(s)
Non-destructive testing - Thermographic testing - Eddy-current excited thermography
2018-02
