NA 152

DIN Standards Committee Technical Fundamentals

Project

PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges

Abstract

This document is applicable to cocks for pressure gauges for use in pressure measuring setups for liquids, gases and vapours, which have a male connection on the process side and a female connection with adjusting nut as well as a test connection on the instrument side, for a maximum allowable pressure of 16 bar and an operating temperature range of -10 °C to +50 °C. Three design are specified:

  • Form A: with male test connection G 1/2 B or M20×5;

    • Form B: with round test flange 40×5;

      • Form C: with narrow test flange 60×25. This document does not specify sealing washers; for these DIN EN 837-1 applies

      .

Begin

2022-12-20

Planned document number

DIN 16263

Project number

15202856

Responsible national committee

NA 152-04-01 AA - Mechanical gauges for pressure and temperatur  

draft standard

PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
2024-01
Order from Beuth Verlag

previous edition(s)

PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
2004-07

Order from Beuth Verlag

Contact

Tobias Hübner

Am DIN-Platz, Burggrafenstr. 6
10787 Berlin

Tel.: +49 30 2601-2988
Fax: +49 30 2601-42988

Send message to contact