2. Getting involved
3. Standards Committees
4. DKE

DKE German Commission for Electrical, Electronic & Information Technologies of DIN and VDE

Overview

This International Standard applies to composite hollow core station post insulators consisting of a load-bearing insulating tube (core) made of resin impregnated fibres, insulating filler material (solid, liquid, gaseous - pressurized or unpressurized), a housing (outside the insulating tube) made of polymeric material (for example silicone or ethylene-propylene) and fixing devices at the ends of the insulating tube. Composite hollow core station post insulators as defined in this standard are intended for general use in substations in both, outdoor and indoor environments, operating with a rated AC voltage greater than 1000 V and a frequency not greater than 100 Hz or for use in direct current systems with a rated voltage greater than 1500 V DC. The object of this standard is: - to define the terms used; - to prescribe test methods; - to prescribe acceptance criteria. All the tests in this standard, apart from the thermal-mechanical test, are performed at normal ambient temperature. This standard does not prescribe tests that are characteristic of the apparatus of which the composite hollow core station post insulator ultimately may form a part (for example, disconnector switch, reactor support, HVDC valves). The standard differs from DIN EN 62772 (VDE 0674-11):2017-06 as follows: a) changes to the terms; b) changes to the test methods according to IEC TR 62039 and IEC 62217 (test of hydrophobicity transfer; water diffusion test on a core without a protective suit); c) harmonization of Table 1 (Required design and type tests) with other product standards; d) update of Annex A (Qualification of fillings); e) addition of the new informative Annex B (Definition of loads, relationship between loads).

Document: references other documents

Responsible national committee

DKE/K 451 - Isolatoren