DKE German Commission for Electrical, Electronic & Information Technologies of DIN and VDE
DIN EN 50541-1
; VDE 0532-241:2012-08
Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 1: General requirements; German version EN 50541-1:2011
Drehstrom-Trocken-Verteilungstransformatoren, 50 Hz, 100 kVA bis 3 150 kVA, mit einer höchsten Spannung für Betriebsmittel kleiner oder gleich 36 kV - Teil 1: Allgemeine Anforderungen; Deutsche Fassung EN 50541-1:2011
Overview
Due to their compact design, dry-type distribution transformers can be used in nearly every environment. In particular, they allow for economical and nearly maintenance-free operation. The used materials of the environmentally-friendly dry type transformers can be recycled to the greatest possible extent. This European Standard covers transformers from 100 kVA to 3 150 kVA intended for operation in three phases distribution networks, for indoor continuous service, 50 Hz, natural cooling, with two windings: - a primary (high voltage) winding with a highest voltage for equipment of 3,6 kV to 36 kV; - a secondary (low voltage) winding with a highest voltage for equipment not exceeding 1,1 kV. For outdoor application, special design or enclosure (enclosure with adapted IP and IK degrees protections) should be requested. This European Standard may be applied, as a whole or in part to transformers having windings with more than one rated voltage. In this case the rated power for each coupling ratio should be specified by the purchaser. For dry type transformers installed in power generating plants, additional requirements, not covered by this European Standard, and alternative requirements may be specified. For dry type transformers dedicated to wind turbines applications additive requirements are specified in EN 60076-16. The object of this European Standard is to lay down requirements related to electrical characteristics, dimensions and designs of three phases distribution dry type transformers. These transformers should be in accordance with EN 60076-11 for general requirements. The responsible committee is Subcommittee UK 321.2 "Transformatoren, Leistungen und Abmessungen" ("Transformers, performances and dimensions") of the DKE (German Commission for Electrical, Electronic and Information Technologies) at DIN and VDE.
