DKE German Commission for Electrical, Electronic & Information Technologies of DIN and VDE
Feed-through terminals with cast resin insulator for high voltage
Abstract
This document is applicable to bushing terminals for high voltage, which are primarily used for the electrical connection of rotating electrical machines up to 6,6 kV or 11 kV rated voltage in accordance with DIN EN 60034-1 (VDE 0530-1). With the M16 bushing bolt, they are suitable for higher short-circuit ratings than the bushing terminals with ceramic insulator in accordance with DIN V 46265-1. Section 6 must be observed for the use of feed-through terminals and their interchangeability with feed-through terminals to DIN V 46265-1. When used for explosion-protected electrical equipment, the standards of the DIN EN (IEC) 60079 series must be observed.
Begin
2024-01-26
Planned document number
DIN/TS 46264
Project number
02232062
Responsible national committee
DKE/UK 311.1 - Elektrische Maschinen, Leistungen und Abmessungen
previous edition(s)
High-voltage feed-through terminals with cast resin insulator
1988-06
