DIN Standards Committee Building and Civil Engineering
Geotechnical investigation and testing - Laboratory testing of soil - Part 13: Swelling test for Soils, Hard Soils and Soft Rocks - Procedure with cycles on a single specimen
Abstract
This document will specify methods for the determination of the swelling characteristics of soft rocks or hard soils in an oedometric cell, i.e. constraint lateral deformation with axial loading. This document is applicable to the laboratory determination of swelling pressure and strain within the scope of geotechnical investigations. Swelling test results are used for the design of rock and soil support and lining for excavation and tunnelling in swelling rocks to prevent major unexpected damages due to swelling. The swelling test is performed on an undisturbed cylindrical specimen. The specimen is first loaded in the dry state to the in situ stress condition, unloaded and reloaded to the design stress of interest. The specimen is immersed under constant stress conditions and then unloaded.
Begin
2025-02-17
WI
00341147
Planned document number
prEN ISO 17892-13
