Project

Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery; German version CEN/TR 15350:2019

Abstract

This DIN SPEC gives guidelines for estimating, assessing and documenting the daily vibration exposure due to the use of hand-held power tools and hand-guided machines, according to the requirements of the European Physical Agents Directive (vibration) 2002/44/EC. This DIN SPEC is addressed to competent services for the assessment of vibration exposure at the workplace and to national authorities and industrial organisations. It helps to establish documentation for specific machinery or work situations and can also be useful for employers. It follows the method of DIN EN ISO 5349-1 and DIN EN ISO 5349-2 but instead of measuring the vibration magnitudes at the specific workplaces, the methods in this DIN SPEC use existing vibration values from other sources of information including those provided by the manufacturers of the machinery according to the requirements of the Machinery Directive 2006/42/EC. It is important that the vibration values used in the exposure assessment are representative of those in the specific use of the machinery. Workplace measurements, however, are required if suitable data are not available to represent the vibration under the specific working conditions or if the calculation results do not help to decide whether or not the vibration exposure limit value or exposure action value is likely to be exceeded. This DIN SPEC gives guidance on how to estimate the exposure duration and the daily vibration exposure A(8) as defined in DIN EN ISO 5349-1. It also offers a simple method for estimating the daily vibration exposure by means of a table which indicates the vibration exposure as a function of the equivalent vibration total value and the associated exposure duration. Both methods can be used even in cases of multiple exposures on the same day.

Begin

2018-12-03

WI

00231117

Planned document number

DIN CEN/TR 15350

Project number

00101043

Responsible national committee

NA 001-03-12 AA - Human exposure to vibration - Hand-transmitted vibration 

Responsible european committee

CEN/TC 231/WG 2 -  

previous edition(s)

Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery; German version CEN/TR 15350:2013
2013-12

Order from Beuth Verlag

Contact

Dipl.-Ing.

Ulrich Schober

Saatwinkler Damm 42/43
13627 Berlin

Tel.: +49 30 2601-2429
Fax: +49 30 2601-42429

Send message to contact