Project

Railway applications - Wheelsets and bogies - Wheels - Product requirements; German version EN 13262:2020

Abstract

This European Standard specifies the characteristics of railway wheels for use on European networks. !Four steel grades, ER6, ER7, ER8 and ER9 are defined in this standard; for European freight wagon interoperability purposes only grades ER6, ER7 and ER8 are applicable. NOTE 1 Grade ER6 is not normally fit for the duty of application to freight wagons; it is normally applied in low axleload situations." !Certain characteristics are defined according to a category 1 or a category 2. Category 1 is generally chosen when the train speed is higher than 200 km/h. Freight vehicles running at speeds lower than 200 km/h generally use wheels of Category 2." These categories can sometimes be subdivided, depending upon the characteristics. This standard is applicable to solid forged and rolled wheels which are made from vacuum degassed steel and have a chilled rim. They are to have already been used in commercial conditions on a European network in a significant quantity, or to have satisfied a technical approval procedure according to EN 13979-1 for their design. !NOTE 2" The definition of other wheels may be found in other documents, such as UIC leaflets or ISO standards. !NOTE 3" The technical approval procedure is not within the scope of this standard. !NOTE 4" Rim-chilled" describes heat treatment of the rim, the aim of which is to harden the rim and to create compressive residual stresses in the rim.

Begin

2013-06-18

WI

00256851

Planned document number

DIN EN 13262

Project number

08700959

Responsible national committee

NA 087-00-02 AA - Running gear 

Responsible european committee

CEN/TC 256/SC 2/WG 11 - Wheels - Wheelsets 

draft standard

Railway applications - Wheelsets and bogies - Wheels - Product requirements; German and French version prEN 13262:2018
2018-07
Order from Beuth Verlag

previous edition(s)

Railway applications - Wheelsets and bogies - Wheels - Product requirements; German version EN 13262:2004+A2:2011; Corrigendum to DIN EN 13262:2011-06
2013-02

Order from Beuth Verlag

Railway applications - Wheelsets and bogies - Wheels - Product requirements; German version EN 13262:2004+A2:2011
2011-06

Order from Beuth Verlag

Contact

Thomas Berger

Rolandstr. 4
34131 Kassel

Tel.: +49 561 997918-21

Send message to contact