DKE German Commission for Electrical, Electronic & Information Technologies of DIN and VDE
Fibre optic interconnecting devices and passive components - Fibre optic connector multimode optical interfaces - Part 2-2: Connection of 50 µm core diameter multimode physically contacting fibres - Non-angled and angled for reference connector application, at wavelength of 850 nm using IEC 60793-2-10 selected A1-OM2b to A1-OM5b fibre only (IEC 86B/4607/CD:2022); Text in German and English
Abstract
This part of the IEC 63267 series defines the dimensional limits of an optical interface for reference connections necessary to meet specific requirements for fibre-to-fibre interconnection of non-angled and angled polished multimode reference connectors intended to be used for attenuation measurements in the field or factory. Several grades of reference connections are defined in this document. The multimode reference connectors are terminated to selected IEC 60793-2-10 A1-OM2b to A1-OM5b fibre. The geometrical dimensions and tolerances of the specified reference connections have been developed primarily to limit the variation in measured attenuation between multiple sets of two reference connectors, and therefore to limit the variation in measured attenuation between randomly chosen reference connectors when mated with connectors in the field or factory.
Begin
2022-05-10
Planned document number
DIN EN IEC 63267-2-2
Project number
02231010
Responsible national committee
DKE/UK 412.7 - LWL-Verbindungstechnik und passive optische Komponenten
draft standard
Fibre optic interconnecting devices and passive components - Fibre optic connector multimode optical interfaces - Part 2-2: Connection of 50 µm core diameter multimode physically contacting fibres - Non-angled and angled for reference connector application, at wavelength of 850 nm using IEC 60793-2-10 selected A1-OM2b to A1-OM5b fibre only (IEC 86B/4607/CD:2022); Text in German and English
2023-07
Order from DIN Media
