| Bezeichnung | Titel deutsch | Titel englisch |
|---|
| DIN 79 | Vierkante für Spindeln und Bedienteile | Squares for operating spindles and operating elements |
| DIN 319 | Kugelknöpfe | Ball knobs |
| DIN 4000-76/A1 | Sachmerkmal-Listen - Teil 76: Schneidplatten, geklemmt; Änderung 1 | Tabular layouts of properties - Part 76: Inserts, indexable; Amendment 1 |
| DIN 4000-81 | Sachmerkmal-Listen - Teil 81: Bohr- und Senkwerkzeuge mit nicht
lösbaren Schneiden | Tabular layouts of properties - Part 81: Drills and countersinking tools with non-indexable cutting edges |
| DIN 4000-93 | Sachmerkmal-Listen - Teil 93: Spannzangen, Spannhülsen,
Klemmhülsen, Spreizhülsen und Spannköpfe | Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads |
| DIN 4000-95 | Sachmerkmal-Listen - Teil 95: Trennstellenkodierung für Werkzeuge und Spannzeuge | Tabular layouts of properties - Part 95: Interface coding for tools and clamping devices |
| DIN 4000-102 | Sachmerkmal-Listen - Teil 102: Datenaustausch für Sachmerkmallisten mittels XML-Schema | Tabular layouts of properties - Part 102: Data exchange for tabular layouts of properties with XML schema |
| DIN 4000-126 | Sachmerkmal-Listen - Teil 126: Reibwerkzeuge mit nicht lösbaren
Schneiden | Tabular layouts of properties - Partie 126: Reamers with non-indexable cutting edges |
| DIN 4000-171 | Sachmerkmal-Listen - Teil 171: Auswechselbare Schneideinsätze zum Bohren | Tabular layouts of properties - Part 171: Replaceable inserts for drilling |
| DIN 4000-172 | Sachmerkmal-Listen - Teil 172: Angetriebene Werkzeugeinheiten | Tabular layouts of properties - Part 172: Driven tool units |
| DIN 4000-173 | Sachmerkmal-Listen - Teil 173: Maschinell betätigte Aussteuerwerkzeuge | Tabular layouts of properties - Part 173: Machine operated feed out tools |
| DIN 4000-174 | Sachmerkmal-Listen - Teil 174: Schneidplatten zum Reiben | Tabular layouts of properties - Part 174: Inserts for reaming |
| DIN 4000-175 | Sachmerkmal-Listen - Teil 175: Kassetten und Einsätze für lösbare Schneidplatten | Tabular layouts of properties - Part 175: ...Titel ergänzen... |
| DIN 4003-1/A1 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 1: Übersicht und Grundlagen; Änderung A1 | Concept for the design of 3D models based on properties according to DIN 4000 - Part 1: Overview and fundamental principles; Amendment A1 |
| DIN 4003-77 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 77: Schneidkörper, geklemmt, zur Stech- und Gewindebearbeitung | Concept for the design of 3D models based on properties according to DIN 4000 - Part 77: Inserts, clamped, for thread machining |
| DIN 4003-81/A1 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 81: Bohr- und Senkwerkzeuge mit nicht lösbaren Schneiden; Änderung A1 | Concept for the design of 3D models based on properties according to DIN 4000 - Part 81: Drills and counter sinking tools with non-indexable cutting edges; Amendment A1 |
| DIN 4003-82 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 82: Fräser mit Schaft und nicht lösbaren Schneiden | Concept for the design of 3D models based on properties according to DIN 4000 - Part 82: End mills with non-indexable cutting edges |
| DIN 4003-83 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 83: Fräser mit Bohrung und nicht lösbaren Schneiden | Concept for the design of 3D models based on properties according to DIN 4000 - Part 83: Milling cutter with arbor hole and non-indexable cutting edges |
| DIN 4003-84 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 84: Modulare Werkzeugsysteme mit verstellbaren Schneidenträgern für die Bohrungsbearbeitung | Concept for the design of 3D models based on properties according to DIN 4000 - Part 84: Modular tooling systems with adjustable cartridges for boring |
| DIN 4003-87 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 87: Fräser mit Schaft für auswechselbare Schneiden | Concept for the design of 3D models based on properties according to DIN 4000 - Part 87: End mills with indexable inserts |
| DIN 4003-88 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 88: Fräser mit Bohrung für auswechselbare Schneiden | Concept for the design of 3D models based on properties according to DIN 4000 - Part 88: Milling cutter with arbor hole for indexable inserts |
| DIN 4003-89 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 89: Werkzeughalter und Zwischenmodule | Concept for the design of 3D models based on properties according to DIN 4000 - Part 89: Adaptive items for tools and extenders |
| DIN 4003-90 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 90: Klemmhalter und Werkzeugköpfe für auswechselbare Schneiden | Concept for the design of 3D models based on properties according to DIN 4000 - Part 90: Toolholders for indexable inserts |
| DIN 4003-93 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 93: Spannzangen, Spannhülsen, Klemmhülsen, Spreizhülsen und Spannköpfe | Concept for the design of 3D models based on properties according to DIN 4000 - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads |
| DIN 4003-126 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 126: Reibwerkzeuge mit nicht lösbaren Schneiden | Concept for the design of 3D models based on properties according to DIN 4000 - Part 126: Reamers with non-indexable cutting edges |
| DIN 4003-127 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 127: Reibwerkzeuge für auswechselbare Schneiden | Concept for the design of 3D models based on properties according to DIN 4000 - Part 127: Reamers for replaceable inserts |
| DIN 4003-171 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 171: Auswechselbare Schneideinsätze zum Bohren | Concept for the design of 3D models based on properties according to DIN 4000 - Part 171: Replaceable inserts for drilling |
| DIN 4003-172 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 172: Angetriebene Werkzeugeinheiten | Concept for the design of 3D models based on properties according to DIN 4000 - Part 172: Driven tool units |
| DIN 4003-173 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 173: Aussteuerwerkzeuge | Concept for the design of 3D models based on properties according to DIN 4000 - Part 173: Machine operated feed out tools |
| DIN 4003-174 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 174: Schneidplatten zum Reiben | Concept for the design of 3D models based on properties according to DIN 4000 - Part 174: Inserts for reaming |
| DIN 4003-175 | Konzept für den Aufbau von 3D-Modellen auf Grundlage von Merkmalen nach DIN 4000 - Teil 175: Kassetten, Einsätze und Schneidenträger für auswechselbare Schneiden | Concept for the design of 3D models based on properties according to DIN 4000 - Part 175: Inserts, indexable |
| DIN 5129 | Spalthämmer | Wood splitting hammers |
| DIN 5130 | Kupferhämmer | Copper hammers |
| DIN 5131 | Beile | Hatchets |
| DIN 5208 | Winkelschraubendreher für Schrauben mit Kreuzschlitz | Double offset screwdrivers for cross point screws |
| DIN 6386-1 | Drehfutter; Technische Lieferbedingungen für handbetätigte Drehfutter | Lathe chucks; technical conditions of delivery for hand operated lathe chucks |
| DIN 6598 | Klemmhalter zum Außen- und Innendrehen mit Kegel-Hohlschaft nach DIN 69893-7 für Wendeschneidplatten - Übersicht, Zuordnung der Maße | Tool holders for external and internal turning with hollow taper shank according to DIN 69893-7 for indexable inserts - General survey, Correlation of dimensions |
| DIN 7200 | Locheisen | Hollow punches |
| DIN 7287 | Äxte und Beile aus Stahl; Technische Lieferbedingungen | Steel axes and hatchets; technical specifications |
| DIN 7294 | Äxte | Axes |
| DIN 7353 | Schlagstempel für Metall | Metal marking punches |
| DIN 7354 | Schlagstempel für Holz und Leder | Wood and leather marking punches |
| DIN 7424 | Steckschlüsseleinsätze mit Außensechskant für Sechskantschrauben, maschinenbetätigt | Socket wrenches with hexagon drive extension for hexagon bolts, machine operated |
| DIN 9825-2 | Werkzeuge der Stanztechnik - Führungssäulen für Säulengestelle - Teil 2: Form D | Tools for pressing - Guide pillars for press tool sets - Part 2: Type D |
| DIN 9825-4 | Werkzeuge der Stanztechnik - Führungssäulen für Säulengestelle - Teil 4: Form L und Form LA | Tools for pressing - Guide pillars for press tool sets - Part 4: Type L and Type LA |
| DIN 9831-1 | Werkzeuge der Stanztechnik - Führungsbuchsen für Säulengestelle - Teil 1: Form AG, Form BG und Form CG, Gleitführungen | Tools for pressing - Guide bushes for press tool sets - Part 1: Type AG, Type BG and Type CG, gliding bushes |
| DIN 9831-2 | Werkzeuge der Stanztechnik - Führungsbuchsen für Säulengestelle - Teil 2: Form AW, Form BW und Form CW, Wälzführungen | Tools for pressing - Guide bushes for press tool sets - Part 2: Type AW, Type BW and Type CW, ball cage bushes
|
| DIN 9833 | Werkzeuge der Stanztechnik - Führungssäulen, Form D | Tools for pressing - Guide pillars, type D |
| DIN 69893-5 | Kegel-Hohlschäfte mit Plananlage - Teil 5: Kegel-Hohlschäfte Form E; Maße | Hollow taper shanks with flat contact surface - Part 5: Hollow taper shanks type E; Dimensions |
| DIN 69893-7 | Kegel-Hohlschäfte mit Plananlage - Teil 7: Kegel-Hohlschäfte Form T für stehende Werkzeuge; Maße und Ausführung | Hollow taper interface with flange contact surface - Part 7: Hollow taper shanks type T for stationary tools; Dimensions and design |
| DIN EN 847-1 | Maschinen-Werkzeuge für Holzbearbeitung - Sicherheitstechnische Anforderungen - Teil 1: Fräs- und Hobelwerkzeuge, Kreissägeblätter; Deutsche Fassung prEN 847-1:2011 | Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades; German version prEN 847-1:2011 |
| DIN EN 847-2 | Maschinen-Werkzeuge für Holzbearbeitung - Sicherheitstechnische Anforderungen - Teil 2: Anforderungen für den Schaft von Fräswerkzeugen; Deutsche Fassung prEN 847-2:2011 | Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools; German version prEN 847-2:2011 |
| DIN EN 847-3 | Maschinen-Werkzeuge für Holzbearbeitung - Sicherheitstechnische Anforderungen - Teil 3: Spannzeuge; Deutsche Fassung prEN 847-3:2011 | Tools for woodworking - Safety requirements - Part 3: Clamping devices; German version prEN 847-3:2011 |
| DIN EN ISO 6103 rev | Schleifkörper aus gebundenem Schleifmittel - Zulässige Unwucht von Schleifscheiben im Lieferzustand - Statische Prüfung (ISO 6103); Deutsche Fassung EN ISO 6103 | Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103); German version EN ISO 6103 |
| DIN EN ISO 6789-1 rev | Schraubwerkzeuge - Handbetätigte Drehmoment-Werkzeuge - Anforderungen und Prüfverfahren für die Typprüfung, Annahmeprüfung und das Rekalibrierverfahren | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
| DIN EN ISO 6789-2 rev | Schraubwerkzeuge - Handbetätigte Drehmomentwerkzeuge - Anforderungen und Prüfverfahren für die Typprüfung, Annahmeprüfung und das Rekalibrierverfahren - Teil 2: Anforderungen an die Kalibrierung und die Bestimmung der Messunsicherheit | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure - Part 2: Requirements for calibration and determination of measurement uncertainly |
| DIN EN ISO 16089 | Werkzeugmaschinen - Sicherheit - Ortsfeste Schleifmaschinen | Machine tools - Safety - Stationary grinding machines |
| DIN ISO 666 | Werkzeugmaschinen - Aufspannen von Schleifscheiben mit Hilfe von Aufnahmeflanschen (ISO 666:2010) | Machine tools - Mounting of grinding wheels by means of hub flanges (ISO 666:2010) |
| DIN ISO 5429 | Schleifmittel auf Unterlagen - Lamellenschleifscheiben mit festen oder losen Flanschen (ISO/DIS 5429:2011) | Coated abrasives - Flap wheels with incorporated flanges or separate flanges (ISO/DIS 5429:2011) |
| DIN ISO 6106 | Schleifmittel - Überprüfung der Korngrößen von Diamant oder kubischem Bornitrid (ISO/DIS 6106:2011) | Abrasive products - Checking the grit size of superabrasives (ISO/DIS 6106:2011) |
| DIN ISO 8486-2 | Schleifkörper aus gebundenem Schleifmittel - Bestimmung und Bezeichnung der Korngrößenverteilung - Teil 2: Mikrokörnungen F230 bis F2000 (ISO 8486-2:2007) | Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits F230 to F2000 (ISO 8486-2:2007) |
| DIN ISO 8693 | Press-, Spritzgieß- und Druckgießwerkzeuge - Flachauswerfer (ISO 8693:2011) | Tools for moulding - Flat ejector pins (ISO 8693:2011) |
| DIN ISO 9183-2 | Werkzeuge der Stanztechnik - Stollenführungen für Werkzeuge der Stanztechnik - Teil 2: Typ B (ISO 9183-2:2011) | Tools for pressing - Wear plates for press dies - Part 2: Type B (ISO 9183-2:2011) |
| DIN ISO 10242-1 | Werkzeuge der Stanztechnik - Einspannzapfen - Teil 1: Form A (ISO 10242-1:2011) | Tools for pressing - Punch holder shanks - Part 1: Type A (ISO 10242-1:2011) |
| DIN ISO 10243/A1 | Werkzeuge der Stanztechnik - Druckfedern mit rechteckigem Querschnitt - Einbaumaße und Farbcodierung (ISO 10243:2011/Amd.1:2011) | Tools for pressing - Compression springs with rectangular section - Housing dimensions and colour coding (ISO 10243:2011/Amd.1:2011) |
| DIN ISO 15600 | Press-, Spritzgieß- und Druckgießwerkzeuge - Wärmeisolierplatten für Spritzgießwerkzeuge (ISO 15600:2000) | Tools for moulding - Thermal insulating sheets for injection moulds (ISO 15600:2000) |
| DIN ISO 18084 | Presswerkzeuge für Tabletten - Stempel und Matrizen (ISO 18084:2011) | Press tools for tablets - Punches and dies (ISO 18084:2011) |
| DIN ISO 26622-1 | Modulare Kegelschnittstelle mit Kugellaufbahnsystem - Teil 1: Maße und Bezeichnung von Schäften (ISO 26622-1:2008)
| Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks (ISO 26622-1:2008) |
| DIN ISO 26623-1 | Polygonaler Hohlschaftkegel mit Plananlage - Teil 1: Maße und Bezeichnung von Schäften (ISO 26623-1:2008) | Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks (ISO 26623-1:2008) |
| DIN ISO 28238 | Press- und Spritzgießwerkzeuge - Bauteile für Einspritzsysteme
(ISO 28238:2010) | Compression and injection moulds - Components for gating systems (ISO 28238:2010) |
| ISO/DIS 236-2 | Long fluted machine reamers, Morse taper shanks | Long fluted machine reamers, Morse taper shanks |
| ISO/DIS 240 | Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels | Milling cutters - Interchangeability dimensions for cutter arbors or cutter mandrels |
| ISO/DIS 513 | Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application | Classification and application of hard cutting materials for metal removal with defined cutting edges - Designation of the main groups and groups of application |
| ISO/DIS 525 | Schleifkörper aus gebundenem Schleifmittel - Allgemeine Anforderungen | Bonded abrasive products - General requirements |
| ISO/DIS 603-17 | Schleifkörper aus gebundenem Schleifmittel - Schleifstifte | Bonded abrasive products - Dimensions - Part 17: Mounted wheels |
| ISO/DIS 603-18 | Schleifkörper aus gebundenem Schleifmittel - Teil 18: Glasschleifscheiben | Bonded abrasive products - Dimensions - Part 18: Grinding wheels for flat glass edge grinding machines |
| ISO/CD 1711-1 | Schraubwerkzeuge - Technische Lieferbedingungen - Teil 1: Handbetätigte Schrauben- und Steckschlüssel | Assembly tools for screws and nuts - Technical specifications - Part 1: Hand-operated wrenches and sockets |
| ISO/CD 1711-2 | Schraubwerkzeuge - Technische Lieferbedingungen - Teil 2: Maschinenbetätigte Steckschlüsseleinsätze (impact) | Assembly tools for screws and nuts - Technical specifications - Part 2: Machine-operated sockets ("impact") |
| ISO/DIS 1832 | Indexable inserts for cutting tools - Designation | Indexable inserts for cutting tools - Designation |
| ISO/CD 2725-1 | Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets | Assembly tools for screws and nuts - Square drive sockets - Part 1: Hand-operated sockets |
| ISO/CD 2725-2 | Schraubwerkzeuge - Steckschlüsseleinsätze mit Innenvierkant - Teil 2: Maschinenbetätigte Steckschlüsseleinsätze ("impact") | Assembly tools for screws and nuts - Square drive sockets - Part 2: Machine-operated sockets ("impact") |
| ISO/DIS 2936 | Schraubwerkzeuge - Winkelschraubendreher für Schrauben mit Innenseckskant | Assembly tools for screws and nuts - Hexagon socket screw keys |
| ISO/DIS 3338-2 | Cylindrical shanks for milling cutters - Part 2: Dimensional characteristics of flatted cylindrical shanks | Cylindrical shanks for milling cutters - Part 2: Dimensional characteristics of flatted cylindrical shanks |
| ISO/DIS 3438 | Subland twist drills for holes prior to tapping screw threads | Subland twist drills for holes prior to tapping screw threads |
| ISO/DIS 3466 | Machine taper pin reamers with parallel shanks | Machine taper pin reamers with parallel shanks |
| ISO/DIS 3467 | Machine taper pin reamers with Morse taper shanks | Machine taper pin reamers with Morse taper shanks |
| ISO/FDIS 5608 | Turning and copying tool holders and cartridges for indexable inserts - Designation | Turning and copying tool holders and cartridges for indexable inserts - Designation |
| ISO/DIS 5609-1 | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 1: Designation, styles, dimensions and calculation for corrections | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 1: Designation, styles, dimensions and calculation for corrections |
| ISO/DIS 5609-2 | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 2: Style F | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 2: Style F |
| ISO/DIS 5609-3 | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 3: Style K | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 3: Style K |
| ISO/DIS 5609-4 | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 4: Style L | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 4: Style L |
| ISO/DIS 5609-5 | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 5: Style U | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 5: Style U |
| ISO/DIS 5609-6 | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 6: Style Q | Tool holders for internal turning with cylindrical shank for indexable inserts - Part 6: Style Q |
| ISO/DIS 6106 | Schleifmittel - Überprüfung der Korngrößen von Diamant oder kubischem Bornitrid | Abrasive products - Checking the grit size of superabrasives |
| ISO/DIS 6344-3 | Schleifmittel auf Unterlagen - Korngrößenanalyse - Teil 3: Bestimmung der Korngrößenverteilung der Mikrokörnungen P 240 bis P 2500 | Coated abrasives - Grain size analysis - Part 3: Determination of grain size distribution of microgrits P240 to P2500 |
| ISO/DIS 7388-3 | Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF | Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF |
| ISO/DIS 8051 | Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess | Long shank taps with nominal diameters from M3 to M10 - Full-diameter shank taps with recess |
| ISO/DIS 9182-1 | Tools for pressing - Guide pillars - Part 1: Types | Tools for pressing - Guide pillars - Part 1: Types |
| ISO/DIS 9182-2 | Tools for pressing - Guide pillars - Part 2: Type A, straight pillars | Tools for pressing - Guide pillars - Part 2: Type A, straight pillars |
| ISO/DIS 9182-3 | Tools for pressing - Guide pillars - Part 3: Type B, end-locking pillars | Tools for pressing - Guide pillars - Part 3: Type B, end-locking pillars |
| ISO/DIS 9182-4 | Tools for pressing - Guide pillars - Part 4: Type C, pillars with taper lead and bush | Tools for pressing - Guide pillars - Part 4: Type C, pillars with taper lead and bush |
| ISO/DIS 9182-5 | Tools for pressing - Guide pillars - Part 5: Type D, end-locking pillars with flange | Tools for pressing - Guide pillars - Part 5: Type D, end-locking pillars with flange |
| ISO/DIS 9284 | Schleifmittelkörnungen - Prüfsiebmaschinen | Abrasive grains - Test-sieving machines |
| ISO/DIS 9448-1 | Tools for pressing - Guide bushes - Part 1: Forms | Tools for pressing - Guide bushes - Part 1: Forms |
| ISO/DIS 9448-2 | Tools for pressing - Guide bushes - Part 2: Form A, gliding bushes, plain, type 1 | Tools for pressing - Guide bushes - Part 2: Form A, gliding bushes, plain, type 1 |
| ISO/DIS 9448-3 | Tools for pressing - Guide bushes - Part 3: Form B, ball cage bushes, plain, type 1 | Tools for pressing - Guide bushes - Part 3: Form B, ball cage bushes, plain, type 1 |
| ISO/DIS 9448-4 | Tools for pressing - Guide bushes - Part 4: Form C, gliding bushes, headed, type 1 | Tools for pressing - Guide bushes - Part 4: Form C, gliding bushes, headed, type 1 |
| ISO/DIS 9448-5 | Tools for pressing - Guide bushes - Part 5: Form D, ball cage bushes, headed, type 1 | Tools for pressing - Guide bushes - Part 5: Form D, ball cage bushes, headed, type 1 |
| ISO/DIS 9448-6 | Tools for pressing - Guide bushes - Part 6: Form E, gliding bushes, flanged, type 1 | Tools for pressing - Guide bushes - Part 6: Form E, gliding bushes, flanged, type 1 |
| ISO/DIS 9448-7 | Tools for pressing - Guide bushes - Part 7: Form F, ball cage bushes, flanged, type 1 | Tools for pressing - Guide bushes - Part 7: Form F, ball cage bushes, flanged, type 1 |
| ISO/DIS 9448-8 | Tools for pressing - Guide bushes - Part 8: Form G, gliding bushes, stepped, type 1 | Tools for pressing - Guide bushes - Part 8: Form G, gliding bushes, stepped, type 1 |
| ISO/DIS 9448-9 | Tools for pressing - Guide bushes - Part 9: Form B, ball cage bushes, plain, type 2 | Tools for pressing - Guide bushes - Part 9: Form B, ball cage bushes, plain, type 2 |
| ISO/DIS 9448-10 | Tools for pressing - Guide bushes - Part 10: Form E, gliding bushes, flanged, type 2 | Tools for pressing - Guide bushes - Part 10: Form E, gliding bushes, flanged, type 2 |
| ISO/DIS 9448-11 | Tools for pressing - Guide bushes - Part 11: Form F, ball cage bushes, flanged, type 2 | Tools for pressing - Guide bushes - Part 11: Form F, ball cage bushes, flanged, type 2 |
| ISO/FDIS 9766 | Drills with indexable inserts - Cylindrical shanks with a parallel flat | Drills with indexable inserts - Cylindrical shanks with a parallel flat |
| ISO/DIS 10649-1 | Cutter arbors with parallel key and tenon drive - Part 1: General dimensions | Cutter arbors with parallel key and tenon drive - Part 1: General dimensions |
| ISO/DIS 10649-2 | Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface | Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface |
| ISO/DIS 10649-3 | Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers | Cutter arbors with parallel key and tenon drive - Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers |
| ISO/DIS 10649-4 | Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers | Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers |
| ISO/DIS 11529 | Milling cutters - Designation - Shank-type and bore type milling cutters of solid or tipped design or with indexable cutting edges | Milling cutters - Designation - Shank-type and bore type milling cutters of solid or tipped design or with indexable cutting edges |
| ISO/DTS 13399-70 | Cutting tool data representation and exchange - Part 70: Graphical data layout - Layer settings for tool layout | Cutting tool data representation and exchange - Part 70: Graphical data layout - Layer settings for tool layout |
| ISO/FDIS 15917 | Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions | Solid ball-nosed end mills with cylindrical shanks made of carbide and ceramic materials - Dimensions |
| ISO 22917 DAM 1 | Schleifwerkzeuge mit Diamant oder Bornitrid - Grenzabmaße und Rundlauftoleranzen für Schleifscheiben mit Diamant oder kubischem Bornitrid | Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride |
| ISO/DIS 23480 | Tools for pressing - Sliding plates | Tools for pressing - Sliding plates |
| ISO/NP TS 13399-2 | Cutting tool data representation and exchange - Part 2: Reference dictionary for the cutting items | Cutting tool data representation and exchange - Part 2: Reference dictionary for the cutting items |
| ISO/NP TS 13399-3 | Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items | Cutting tool data representation and exchange - Part 3: Reference dictionary for tool items |
| ISO/NP TS 13399-4 | Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items | Cutting tool data representation and exchange - Part 4: Reference dictionary for adaptive items |
| ISO/NP TS 13399-5 | Cutting tool data representation and exchange - Part 5: Reference dictionary for assembly items | Cutting tool data representation and exchange - Part 5: Reference dictionary for assembly items |
| ISO/NP TS 13399-50 | Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts | Cutting tool data representation and exchange - Part 50: Reference dictionary for reference systems and common concepts |
| ISO/NP TS 13399-60 | Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems | Cutting tool data representation and exchange - Part 60: Reference dictionary for connection systems |
| ISO/NP TS 13399-301 | Cutting tool data representation and exchange - Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of screwing taps, coldforming taps and screwing dies | Cutting tool data representation and exchange - Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of screwing taps, coldforming taps and screwing dies |
| ISO/NP TS 13399-302 | Cutting tool data representation and exchange - Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of drills and countersinking tools with non-indexable cutting edges | Cutting tool data representation and exchange - Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of drills and countersinking tools with non-indexable cutting edges |
| ISO/NP TS 13399-303 | Cutting tool data representation and exchange - Part 303: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of end mills with non-indexable cutting edges | Cutting tool data representation and exchange - Part 303: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of end mills with non-indexable cutting edges |
| ISO/NP TS 13399-304 | Cutting tool data representation and exchange - Part 304: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of milling cutters with fixing hole and non-indexable edges | Cutting tool data representation and exchange - Part 304: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of milling cutters with fixing hole and non-indexable edges |
| ISO/NP TS 13399-311 | Cutting tool data representation and exchange - Part 311: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of reamers with non-indexable cutting edges | Cutting tool data representation and exchange - Part 311: Concept for the design of 3D models based on properties according to ISO/TS 13399-3 - Modeling of reamers with non-indexable cutting edges |
| ISO/NP 3940 | Tapered die-sinking cutters with parallel shanks | Tapered die-sinking cutters with parallel shanks |
| ISO/NP 6103 | Schleifkörper aus gebundenem Schleifmittel - Zulässige Unwucht von Schleifscheiben im Lieferzustand - Statische Prüfung | Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing |
| ISO/NP 6789-1 | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure - Part 1: Requirements and test method for design conformance testing, quality conformance testing and calibration procedure | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure - Part 1: Requirements and test method for design conformance testing, quality conformance testing and calibration procedure |
| ISO/NP 6789-2 | Schraubwerkzeuge - Handbetätigte Drehmomentwerkzeuge - Anforderungen und Prüfverfahren für die Typprüfung, Annahmeprüfung und das Rekalibrierverfahren - Teil 2: Anforderungen an die Kalibrierung und die Bestimmung der Messunsicherheit | Assembly tools for screws and nuts - Hand torque tools - Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure - Part 2: Requirements for calibration and determination of measurement uncertainly |
| ISO/NP 9138 | Schleifmittelkörnungen - Probenahme und Probenteilung | Abrasive grains - Sampling and splitting |
| ISO/NP 9524 | Werkzeugmaschinen - Spindelkastenstirnseiten für Bearbeitungszentren - Funktionsmaße | Machine tools - Front faces of spindle holders for machining centres - Functional dimensions |
| ISO/NP 12164-3 | Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools | Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools |
| ISO/NP 12164-4 | Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools | Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools |
| ISO/NP 16089 | Werkzeugmaschinen - Sicherheit - Ortsfeste Schleifmaschinen | Machine tools - Safety - Stationary grinding machines |
| ISO/NP 26623-1 | Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks | Polygonal taper interface with flange contact surface - Part 1: Dimensions and designation of shanks |
| ISO/NP 26623-2 | Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers | Polygonal taper interface with flange contact surface - Part 2: Dimensions and designation of receivers |
| ISO/PRF 666 | Machine tools - Mounting of grinding wheels by means of hub flanges | Machine tools - Mounting of grinding wheels by means of hub flanges |
| ISO/PRF 5429 | Schleifmittel auf Unterlagen - Lamellenschleifscheiben mit festen oder losen Flanschen (ISO/DIS 5429:2011) | Coated abrasives - Flap wheels with incorporated flanges or separate flanges |
| ISO/PRF 10649-5 | Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface | Cutter arbors with parallel key and tenon drive - Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface |
| ISO/PRF 10649-6 | Cutter arbors with parallel key and tenon drive - Part 6: Dimensions and desigantion of tool holders with modular taper interface with ball track system | Cutter arbors with parallel key and tenon drive - Part 6: Dimensions and desigantion of tool holders with modular taper interface with ball track system |
